Yamaha NS-P400 Owner's Manual

Also see for NS-C40: Owner's manual Owner's manual Owner's manual Owner's manual Owner's manual

Contents

11English• Connect the main speakers to the speaker output terminalsof the amplifier.• Amplifier line output terminals are generally labeled PREOUT or SUBWOOFER OUT.* For PRE OUT terminal connection, the amplifier mustpossess at least two sets of PRE OUT terminals. Withsome amplifiers with only one set of PRE OUT terminals,connection can result in no sound from the main left andright speakers. In this case, select the method ofconnecting to the speaker output terminals.• To connect with a YAMAHA DSP amplifier (or AV receiver),connect the LOW PASS (or SUBWOOFER etc.) terminal onthe rear of the DSP amplifier (or AV receiver) to either theleft (L) or right (R) INPUT2 terminal of the subwoofer.To connect the subwoofer to the SPLIT SUBWOOFERterminals on the rear of the DSP amplifier, connect them toboth of the left (L) and right (R) INPUT2 terminals of thesubwoofer.OUTPUTTO SPEAKERSINPUT1FROM AMPLIFIERINPUT2ON OFFAUTOPOWERINPUT2ON OFFAUTOPOWERPRE OUT(SPLIT, SUBWOOFER)LOW PASS(SUBWOOFER)Pin plug cordsAmplifierTo AC outletTo connect the subwoofer to line output (pin jack) terminals of the amplifierNotes• When connected to line output terminals of the amplifier,other speakers should not be connected to the OUTPUTterminals on the rear panel of the subwoofer. If connected,they will not produce sound.• When connecting to a monaural line output terminal of theamplifier, connect to either the left or right INPUT2 terminal.SubwooferMain speaker Main speakerLeft Right