Yamaha R-S201 Owner's Manual

Also see for R-S201: Owner's manual Owner's manual Service manual

12 EnBASIC OPERATION1 Press A (power) to turn on this unit.2 Press one of the Input selector buttons toselect the desired input source.3 Press SPEAKERS A and/or SPEAKERS B toselect desired speaker(s).• When one set of speakers is connected using bi-wireconnections, or when using two sets of speakers simultaneously(A and B), make sure SP A and SP B are displayed on the frontpanel display.• When listening with headphones, turn off the speakers.4 Play the source.5 Press VOLUME +/– to adjust the soundoutput level.yYou can adjust the tonal quality by using BASS –/+ andTREBLE –/+, and the left/right sound balance of speakersby using BALANCE L/R (see page 6).6 When finished listening, press A (power) toset this unit to standby mode.Press A (power) to turn this unit on again.y• You can also use the buttons or knobs on the front panel if theyhave the same or similar names as those on the remote control.• For recording, see page 5.PLAYBACKPlaying a sourceA (power)Input selectorbuttonsSPEAKERS A/BVOLUME +/–TREBLE –/+BASS –/+BALANCE L/RNotes