Yamaha R-S201 Owner's Manual

Also see for R-S201: Owner's manual Owner's manual Service manual

15 EnFM/AM TUNINGBASICOPERATION English1 Press FM to select TUNER as the inputsource.2 Press MENU to enter the Option menu.The Option menu for TUNER is displayed (seepage 19).3 Press B / C to select “AUTO PRESET”, andthen press ENTER.This unit starts scanning the FM band about3 seconds later from the lowest frequency upwards.y• Before scanning begins, you can specify the first presetnumber to be used by pressing PRESET j / i or B/C.• To cancel scanning, press D.When a station to preset is found, information isdisplayed on the front panel display as shown in theillustration above.When scanning is complete, “FINISH” is displayed,and then the display returns to the Option menu.To return the display to the original state, pressMENU.■ Presetting stations manuallyYou can manually register the desired radio stations.1 Tune in to the desired FM/AM station.See page 14 for tuning instructions.2 Press MEMORY.“MANUAL PRESET” is displayed briefly on thefront panel display, and then the preset number towhich the station will be registered is displayed.yBy holding down MEMORY for more than 2 seconds, youcan skip the following steps and automatically register theselected station to an empty preset number (i.e., the presetnumber following the last preset number used).3 Press PRESET j / i to select the presetnumber to which the station will beregistered.When you select a preset number to which no stationis registered, “EMPTY” is displayed. When youselect a preset number to which a station has alreadybeen registered, the frequency of the station isdisplayed.4 Press MEMORY.When registration is complete, the display returns tothe original state.y• To cancel registration, switch input or band or do not performany operations for about 30 seconds.• You can also preset stations manually by pressing buttons onthe front panel with the same names as remote control .Preset number FrequencyPRESET j / iMEMORYPreset number