8-11– +ELECELECTRICAL STARTING SYSTEMTROUBLESHOOTING1. Connect:• Starter relay terminals(battery side and starter motor side)1 Jumper lead2. Check:• Starter motor operationOKSTARTER MOTOR DOES NOT OPERATE.NOCheck the battery and connectors.Refer to “BATTERY INSPECTION” in CHAPTER2.OK NOCharge and/or replace the battery.Refer to “BATTERY INSPECTION” inCHAPTER 2.Repair or replace the starter motor.WARNINGA wire for the jumper lead 1 must have theequivalent capacity as that of the battery lead ormore, otherwise it may cause the jumper lead tobe burned.This check is likely to produce sparks, so besure that no flammable gas or fluid is in thevicinity.3. Disconnect:• Starter relay coupler4. Connect:• Starter relay coupler terminals1 Jumper lead5. Check:• Starter motor operationOK*NOReplace the starter relay.
