2-36INSPADJTRACK TENSION ADJUSTMENTd. Check the track alignment with the slide runner2. If the alignment is incorrect, turn the left andright adjusters to adjust.5 Slide runner6 Track7 Track metala GapÊ Forwarde. Adjust the track deflection until the specifiedamount is obtained.CAUTION:The adjusters should be turned an equalamount.f. Recheck the alignment and deflection. If neces-sary, repeat steps (c) to (e) until the specifiedamount is obtained.g. Tighten the rear axle nut.Track alignmentÈShifted torightÉShifted toleft3 Left adjuster Turn out Turn in4 Right adjuster Turn in Turn outTrack deflection More thanspecifiedLess thanspecified3 Left adjuster Turn in Turn out4 Right adjuster Turn in Turn outT R. .Rear axle nut:RS90/RS90R/RSG90/RS90M/RST90:75 Nm (7.5 m · kg, 54 ft · lb)RST90TF:80 Nm (8.0 m · kg, 58 ft · lb)3 4È É
