Yamaha RS90NL Owner's Manual
Also see for RS90GTL: Suplementary service manualSupplementary service manual
                                                                                                        | |
Contents
| 
5-10ESU00039Headlight beam switchPush the headlight beam switch to change the headlightbeam to high or low.1 Headlight beam switch2 Push3 High beam4 Low beamESU04301Auxiliary DC jackFor RS90GTThe auxiliary DC jack is located in the front panel andcan be used for accessories.NOTE:@The auxiliary DC jack cannot be used if the engine is notrunning.@1. Start the engine.2. Open the auxiliary DC jack cap 1, and then insertthe accessory power plug into the jack 2.NOTE:@After using the auxiliary DC jack, be sure to remove theaccessory power plug from the jack and close the auxil-iary DC jack cap.@CAUTION:@ Do not use accessories requiring more than themaximum rated capacity for the auxiliary DC jack.This may overload the circuit and cause the fuseto blow. (See pages 8-35–8-37 for the specifiedamperage.) Do not use an automotive cigarette lighter orother accessory with a plug that gets hotbecause the jack can be damaged.@Maximum rated capacity:DC 12 V, 2.5 A (30 W) |
Related manuals for Yamaha RS90GTL
manualsdatabase
Your AI-powered manual search engine