8-168. Install the V-belt over the primary sheave assembly.9. Rotate the secondary sliding sheave clockwise 6and push 7 it so that it separates from the secondaryfixed sheave.10. Install the V-belt 8 between the secondary slidingand secondary fixed sheaves.11. Install the drive guard.WARNING@Never run the engine with the V-belt or drive guardremoved.@ESU03513Checking the drive chain housing oil level andthe drive chain tensionChecking the oil levelWARNING@The engine, oil tank, brake disc, and coolant hoseswill be very hot after the engine has been run. Avoidcontact while they are still hot with any part of yourbody or clothing during inspection or repair.@1. Place the snowmobile on a level surface.2. Remove the dipstick 1, wipe it off with a clean rag,and then insert it back into the filler hole.
