8-211. Loosen the locknut 1 and the adjusting bolt 2.2. Loosen the cable locknut 3.3. Turn the cable adjuster 4 in or out to adjust the cablelength.4. Tighten the cable locknut.5. Turn the adjusting bolt in or out to adjust the clear-ance between the parking brake pads 5 and thebrake disc 6.6. Tighten the locknut.ESU00180Checking the brake fluid levelPlace the snowmobile on a level surface. Check that thebrake fluid is above the lower level and replenish whennecessary.1 Lower levelWARNING@Be careful that water does not enter the master cylin-der when refilling. Water will significantly lower theboiling point of the fluid and may result in vaporlock.If the brake fluid level goes down, consult a Yamahadealer.@CAUTION:@Brake fluid may deteriorate painted surfaces or plas-tic parts. Never spill any fluid. If any is spilled, cleanit up immediately.@Cable length a: 43.5–46.5 mm (1.713–1.831 in)Clearance b + c: 1.5–2.0 mm (0.059–0.079 in)Specified brake fluid: DOT 4
