5-12ESU00035Parking brake leverWhen parking the snowmobile or starting the engine,apply the parking brake by moving the brake lever 1 tothe left.To release the parking brake, move the parking brakelever 1 to the right.È To apply the parking brakeÉ To release the parking brakeWARNING@ Always set the parking brake before attempting tostart the engine. Never run the snowmobile with the parking brakeapplied. This may overheat the brake disc andreduce braking ability.@ESU03411Shift leverThe shift lever is used to put the snowmobile into forwardor reverse. After coming to a complete stop, pull the shiftlever out, slide it to “FWD” or to “REV” until it stops, andthen release it.1 Shift lever2 Pull out3 Slide to “FWD” (Forward)4 Slide to “REV” (Reverse)5 ReleaseCAUTION:@Do not shift from “FWD” to “REV” or from “REV” to“FWD” while the snowmobile is moving. Otherwise,the drive system could be damaged.@AB
