Yamaha Revolabs Executive Elite 01-ELITEEXEC8 Room Control Api Manual

Also see for Revolabs Executive Elite 01-ELITEEXEC4: Installation and operation guide

Contents

6Channel Number:The options for the portion of the serial strings are 1-8 for anExecutive Elite 8, and 1-4 for an Executive Elite 4 system, since each Base station canonly control up to 8 or 4 microphones, respectively. The corresponds to the channel number the microphone is paired to in the Executive Elite.A of “A” will control all microphones.Examples:The following string would set microphone channel 3 to be the chairman microphonefor its mute group:Command: set chairmanmic ch 3 1 Return: val chairmanmic ch 3 1The following strings would turn off all microphones on the Elite:Command: shutdownmic ch A Return: val shutdownmic ch AThe following strings would retrieve the battery status of microphone 5 @ 98%:Command: get batterystatus ch 5 Return: val batterystatus ch 5 98Legacy Command StringsLegacy Commands that were used in the Executive HD have been maintained in theExecutive Elite, to allow for Room Control programming using the Executive HDmodule to be used with Executive Elites. These commands are listed below in thelegacy commands section of the tables.The Command Interface of the Executive Elite has been expanded significantly withadditional and new functionality. These new commands will not work with RevolabsExecutive HD systems.