Yamaha Revolabs HD 02-HDSGL User And Setup Manual

Note: The microphone firmware version must match the Base firmware version for the system tofunction properly. A mismatch may result in no audio from the microphones.Battery:This provides the current battery level for the microphone that is paired to each channel and active.The value changes in 12.5% increments and represents the bottom of the range the battery is in.Therefore a value of 87% means that the battery level is between 87%-100%.Pairing:This provides the ability to activate pairing mode for the respective base station channel. It alsoprovides the pairing status of any base station channel already in pairing mode.Firmware:This window provides the current firmware versions found in the Base Station and microphones aswell as provides the HD Firmware Loader for loading the firmware to the base station andmicrophones.DIP Switches:This displays the current state of the base station DIP switches. When a DIP switch is in the ‘OFF’position the DIP function will remain “greyed out”. When a DIP switch is in the ‘ON’ position, thefunctionality of that DIP switch will change to BLACK to indicated that the feature is active.Revolabs HD Microphones and HD Microphone AdaptersUse any of five microphones with your Revolabs HD ™ System:• Revolabs HD Wearable Wireless Microphone• Revolabs HD Omni-directional Tabletop Wireless Boundary Microphone• Revolabs HD Uni-directional Tabletop Wireless Boundary Microphone• Revolabs HD Universal Wireless Adapter for Handheld Microphones• Revolabs HD Wireless Adapter for Countryman MicrophonesUsing the HD Wearable Wireless MicrophonesThe Revolabs HD Wearable Microphones, shown in the following figure, are paired to the BaseStation and can be worn on the user’s shirt pocket, lapel or on a lanyard. They provide high qualityfull duplex audio between each user and the conferencing or audio system.46532114