3 - 19CHKADJCLEANING THE AIR FILTER ELEMENTS/CHECKING THE COOLANT LEVEL6. Install:• air filter element assembly• air filter case coverNOTE:To prevent air leaks make sure that the sealingsurface of the element matches the sealingsurface of the case.7. Install:• console• passenger seat• driver seatRefer to “SEATS, ENCLOSURE, HOODAND CARGO BED” in chapter 8.CHECKING THE COOLANT LEVEL1. Place the vehicle on a level surface.2. Lift the hood up.3. Check:• coolant levelThe coolant level should be between theminimum level mark a and maximum levelmark b.Below the minimum level mark → Add therecommended coolant to the proper level.CAUTION:• Adding water instead of coolant lowersthe antifreeze content of the coolant. Ifwater is used instead of coolant, checkand if necessary, correct the antifreezeconcentration of the coolant.• Use only distilled water. However, softwater may be used if distilled water is notavailable.4. Start the engine, warm it up for several min-utes, and then turn it off.5. Check:• coolant levelNOTE:Before checking the coolant level, wait a fewminutes until the coolant has settled.6. Close the hood.
