PERIODIC MAINTENANCE AND MINOR REPAIR6-1362. Remove the oil filler bolt and drainbolt to drain the oil from the finalgear case.3. Install the final gear oil drain bolt,and then tighten it to the specifiedtorque.4. Add the recommended final gearoil to the brim of the filler hole.NOTE:GL4 is a quality rating. Hypoid gear oilsrated GL5 or GL6 may also be used.5. Install the oil filler bolt, and thentighten it to the specified torque.6. Check the final gear case for oilleakage. If oil is leaking, check forthe cause.EAU20670Cleaning the air filter elementThe air filter element should be cleanedas follows at the intervals specified inthe periodic maintenance and lubrica-tion chart. Clean the air filter elementmore frequently if you are riding in un-usually wet or dusty areas.1. Remove the air filter case cover byremoving the screws.2. Pull the air filter element out.3. Lightly tap the air filter element toremove most of the dust and dirt,and then blow the remaining dirtout with compressed air as shown.If the air filter element is damaged,replace it.Tightening torque:Final gear oil drain bolt:23 Nm (2.3 m·kgf, 17 ft·lbf)Recommended final gear oil:SAE80 API GL-4 Hypoid gear oilOil quantity:0.19 L (0.20 US qt) (0.17 Imp.qt)Tightening torque:Final gear oil filler bolt:23 Nm (2.3 m·kgf, 17 ft·lbf)1. Air filter case cover2. ScrewU3B81RE0.book Page 13 Friday, June 10, 2005 1:06 PM
