2-24INSPADJ1d. Tighten the bleed screws when the brake leverlimit has been reached, then release the lever.• Repeat steps (a) to (d) until all of the air bubbleshave disappeared from the fluid.• Tighten the bleed screws.Bleed screw:6 Nm (0.6 m · kg, 4.3 ft · lb)NOTE:If bleeding is difficult, it may be necessary to let thebrake fluid settle for a few hours.Repeat the bleeding procedure when the tiny bubblesin the system have disappeared.• Add brake fluid to the proper level.Refer to “BRAKE FLUID LEVEL INSPECTION”.WARNINGAfter bleeding the brake system, check the brakeoperation.DRIVE CHAINOil level inspectionWARNINGThe engine and muffler will be very hot after theengine has run. Avoid touching a hot engine andmuffler while they are still hot with any part ofyour body or clothing during inspection or repair.1. Place the machine on a level surface.2. Check:• Oil levelChecking steps:• Remove the dipstick 1 and wipe it off with aclean rag.Reinsert the dipstick.T R..SEA2525AIR BLEEDING (HYDRAULIC BRAKE SYSTEM)/DRIVE CHAIN
