4-34EBU18101Start switch “ ”Push this switch to crank the engine with the start-er. See the starting instructions on page 6-1 priorto starting the engine.EBU18152Light switch “ / /OFF”Set this switch to “ ” to turn on the low beamsand the taillight. Set the switch to “ ” to turn onthe high beams and the taillight. Set the switch to“OFF” to turn off all the lights.NOTICEECB00041Do not use the headlights with the engineturned off for an extended period of time, oth-erwise the battery may discharge to the pointthat the starter motor will not operate properly.If this should happen, remove the battery andrecharge it. See page 8-37 for battery charginginformation.EBU18282Throttle leverOnce the engine is running, pushing the throttle le-ver will increase the engine speed.Regulate the speed of the ATV by varying thethrottle position. Because the throttle is spring-loaded, the ATV will decelerate, and the engine willreturn to an idle any time the throttle lever is re-leased.Before starting the engine, check the throttle to besure it is operating smoothly. Make sure it returnsto the idle position as soon as the lever is released.EBU18323Speed limiterYour ATV is equipped with an adjustable speedlimiter. The speed limiter keeps the throttle fromfully opening, even when the throttle lever ispushed to the maximum.1. Loosen the locknut.1. Throttle lever
