4-44EBU18061Handlebar switchesEBU18080Engine stop switch “ / ”Set this switch to “ ” before starting the engine.The engine stop switch controls the ignition andstops the engine when it is running. Use this switchto stop the engine in an emergency situation. Theengine will not start or run when this switch is setto “ ”.EBU18101Start switch “ ”Push this switch to crank the engine with the start-er. See the starting instructions on page 6-1 priorto starting the engine.EBU18154Light switch “ / /OFF”Set this switch to “ ” to turn on the low beamsand the taillight. Set the switch to “ ” to turn onthe high beams and the taillight. Set the switch to“OFF” to turn off all the lights.NOTICEECB00043Do not use the headlights with the engineturned off for an extended period of time, oth-erwise the battery may discharge to the pointthat the starter motor will not operate properly.If this should happen, remove the battery andrecharge it. (See page 8-46.)EBU18282Throttle leverOnce the engine is running, pushing the throttle le-ver will increase the engine speed.1. Light switch “ / /OFF”2. Engine stop switch “ / ”3. Start switch “ ”123
