En 24CONNECTIONSSetting up speaker parametersSTEP 4: Playback a test tone10 Press jCursor C repeatedly to display“Test Tone” and press jENTER.11 Use jCursor D / E to select “On.”A test tone plays back as soon as you select “On.”The test tone plays back in a clockwise fashion, asfollows.12 Check that the test tone is playing backand press jRETURN.Return to the previous menu.This completes step 4.STEP 5: Adjust the volume13 Press jCursor B repeatedly to display“Level” and press jENTER.14 Use jCursor B / C to switch the speakerthat is outputting the test tone, lookingfor speakers with a different volume levelto the others.The front panel display shows the speaker that isoutputting the test tone. J115 If you find a speaker with a differentvolume level to the others, use jCursorD / E to adjust the volume. Use Frontspeaker L or R as a default whenadjusting volumes.To raise the volume: Press jCursor E.To lower the volume: Press jCursor D.16 Repeat steps 14 and 15 to adjust thevolume balance for all speakers to yourpreference.17 Press jRETURN when setting iscomplete.Return to the previous menu.This completes step 5.18 Repeat procedures 10-12 (step 4) to stopplayback of the test tone.19 Once you have completed all settings,press iSETUP to close the Setup menu.SETUPRETURNENTER7 85 69 0 101 2 3 4RECENTTVTV VOL TV CHINPUTMUTERECEIVERSCENEOPTIONVOLUMEENHANCER SUR. DECODESTRAIGHTHDMIAVAUDIOTRANSMITSLEEP1 2 3 41 2 3 41 25V-AUXTUNERFMINFO MEMORYAMPRESET TUNINGMOVIE MUSIC STEREOBDDVD TV CD RADIOMUTETOPMENU POP-UPMENUDISPLAYSOURCECODE SETDOCK[ A ] [ B ]jiiSETUPjCursor B / C / D / EjENTERjRETURNSWCLSL SRR>OffOnTEST VOL.Front L Front RCenterSubwooferSurround L Surround RInformation SpeakersFL Front speaker LFR Front speaker RC Center speakerSL Surround speaker LSR Surround speaker RSWFR SubwooferSWCLSL SRRFL----d---- dLEVEL VOL.J 1 : Only speakers configured for use in procedure 5 output the testtone.