Yamaha YHT-493 Owner's Manual

Also see for YHT-493: Owner's manual Owner's manual

Contents

En 38SETUPConfiguring the settings specific for each input source (Option menu)■ Combining HDMI/AV1-2 input sourcevideo and audioInput source: HDMI1-4, AV1-2Combines video from HDMI or AV input sources with analog/digital audio inputs in situations such as:– an external device is connected with an HDMI cable but cannottransmit audio through HDMI– an external device with component video output and analog audiooutput (such as certain game consoles) are connected to thesystemTo change assignments, select an input source (HDMI1-4 or AV1-2)as the video input first, and then select audio input jacks in thismenu.Set as follows according on the desired combination of audio inputjacks.■ Displaying information on audio/videosignalsInput source: HDMI1-4, AV1-4Displays information on digital audio and video signals on thefront panel display. You can display the signal information bypressing jENTER on the menu item and using jCursor B / C.Audio informationVideo informationAudio InAudio inputs Settings methodOptical digital audioinputSelect AV1 or AV4. Connect the external componentaudio cable to the optical jack for the selected input.Coaxial digital audioinputSelect AV2 or AV3. Connect the external componentaudio cable to the coaxial jack for the selected input.Analog audio input Select one of AV5, AUDIO1, or AUDIO2. Connectthe external component audio cable to the audio jackfor the selected input.• For details of settings, refer to “Receiving audio from other inputsources” (☞p. 16) and “Component connections to analog audiooutput devices” (☞p. 17).• To return audio inputs to their previous settings, display this itemagain, and select the original input jack.SWCLSL SRRAudio;;;;;;AV1HDMI1 VOL.Assignable audio input jacksInputs that change the audio sourceSignal InfoFORMAT Format of audio signals.CHAN The number of input signal channels (front/surround/LFE).For example, if input signal channels are 3 frontchannels, 2 surrounds and LFE, “3/2/0.1” isdisplayed.SAMPL The sampling frequency of analog-to-digitalconversion.B RATE The bit rate of input signal per second.V IN Format and resolution of video input signal.V OUT Format and resolution of video output signal.V.MSG(appears onlywhen an errorhas occurred)Error messages about HDMI signals and components.Error messageHDCP Error HDCP authentication failed.Device Over The number of connected HDMIcomponents is over the limit.SWCLSL SRRDolbyDFORMAT VOL.Menu itemInformation• “No Signal” is displayed when no signals are being received,and “---” is displayed if this unit cannot recognize the incomingsignal.• The bit rate may vary during playback.