Yamaha YHT-693 Owner's Manual

Also see for YHT-693: Owner's manual Owner's manual Owner's manual

Contents

Yamaha YHT-693 Owner's Manual Manual pdf 73 page image

En 73APPENDIXTroubleshootingHDMI™ Tuner (FM/AM)FMProblem Cause Remedy SeepageThe front paneldisplay HDMIindicator is flashing.An error with the HDMIconnection has occurred.Try re-inserting the HDMI cable. —Confirm that HDMI video that is notsupported by the unit is not being input(HDMI Input → Option menu → “SignalInfo”).46No picture or sound. The number of components is overthe limit.Disconnect some of the HDMI components. —The connected HDMI componentdoes not support high-bandwidthdigital copyright protection(HDCP).Connect an HDMI component that supportsHDCP.—(When using HDMIControl function)TV sound is notoutput from this unitwhen operating theremote control of theTV.The TV audio output is notconnected to this unit, or thesetting to match operations carriedout on TV is not set.Connect the TV audio output to this unit,and then select the connected input sourcein “TVAudio” (Setup menu → HDMI Setup→ TVAudio).55(When using Audio ReturnChannel function)The Audio Return Channelfunction is not working.Make sure that your TV supports AudioReturn Channel.Set the Audio Return Channel function toon (Setup menu → HDMI Setup →ReturnChan).55Problem Cause Remedy SeepageFM stereo receptionis noisy.You are too far from the stationtransmitter, or the input from theantenna is weak.Check the antenna connections. 22Switch to monaural mode. 35Replace the outdoor antenna with a moresensitive multi-element antenna.—There is distortion,and clear receptioncannot be obtainedeven with a good FMantenna.There is multi-path interference. Adjust the antenna height or orientation, orplace it in a different location.—The desired stationcannot be tuned intowith the automatictuning method.You are in an area far from astation, or input from the antennais weak.Replace the outdoor antenna with a moresensitive multi element antenna.—Use TUNING H / I to manually select thestation.34“No Presets” isdisplayed.No preset stations are registered. Register stations you want to listen to aspreset stations before operation.35“Wrong Station” isdisplayed.An invalid FM/AM frequency hasbeen input.Input a frequency that can be received. —