Yamaha YST-SW005 Owner's Manual

Also see for YST-SW005: Owner's manual Service manual Service manual

Contents

E-4INPUT1FROM AMPLIFIEROUTPUTTO SPEAKERSINPUT2 /MONOAUTOSTANDBYOFFLOWHIGH LOWHIGH HIGH CUTOFFPOWERONVOLUME0 10SPLIT SUBWOOFERSUBWOOFER(LOW PASS)INPUT2 /MONOCONNECTIONSCaution: Plug in the subwoofer and other components after all connections are completed.● All connections must be correct, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also refer to the owner’smanual for each of your components.● Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.)If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of theamplifier. (Refer to pages 6 and 7 for details.)Left mainspeaker Right mainspeakerSubwooferAmplifierTo AC outletConnecting to line output (pin jack) terminals of the amplifier● To connect with a YAMAHA DSP amplifier (or AVreceiver), connect the SUBWOOFER (or LOW PASS etc.)terminal on the rear of the DSP amplifier (or AV receiver)to the L/MONO INPUT2 terminal of the subwoofer. Using one subwooferConnect the main speakers to the speaker output terminals of the amplifier.● When connecting the subwoofer to the SPLITSUBWOOFER terminals on the rear of the DSP amplifier,be sure to connect the L/MONO INPUT2 terminal to the“L” side and the R INPUT2 terminal to the “R” side of theSPLIT SUBWOOFER terminals.