81 POWER switchPress this switch to the ON position to turn on thepower to the subwoofer. When the power of thesubwoofer is on, the power indicator (4) on the rearpanel light up in green. Press this switch again to set itto OFF position to turn off the power of the subwoofer.2 OUTPUT (TO SPEAKERS) terminalsCan be used for connecting to the front speakers.Signals from the INPUT 1 terminals are sent to theseterminals.(Refer to “CONNECTIONS” for details.)3 VOLUME controlAdjusts the volume level. Turn the control clockwise toincrease the volume, and counterclockwise to decreasethe volume.4 Power indicatorLight up in green when the power switch (1) is turnedon; turns off when the power switch is turned off.5 HIGH CUT switchSelects the high frequency cut off point. Normally, it isset to LOW, however, you may set to HIGH ifnecessary. (Refer to page 9.)6 INPUT 2 terminalsUsed to input line level signals from the amplifier.(Refer to “CONNECTIONS” for details.)7 INPUT 1 (FROM AMPLIFIER) terminalsUsed to connect the subwoofer with the speakerterminals of the amplifier.(Refer to “CONNECTIONS” for details.)CONTROLS AND THEIR FUNCTIONSPOWERVOLUMEOUTPUTTO SPEAKERS INPUT2/MONOHIGH LOWHIGHCUTINPUT 1FROM AMPLIFIERONOFF/MONOHIGH LOWHIGHCUTINPUT 1FROM AMPLIFIERINPUT2OUTPUTTO SPEAKERS13 47 6 52VOLUMESubwoofer rear panel