Yamaha YZF-R1 Owner's Manual

Also see for YZF-R1: Owner's manual Owner's manual Parts catalog Assembly instructions Owner's manual

Contents

PERIODIC MAINTENANCE AND ADJUSTMENT6-136TIPMake sure that the O-ring is properlyseated.7. Install the new oil filter cartridgewith an oil filter wrench, and thentighten it to the specified torquewith a torque wrench.8. Install the engine oil drain bolt andits new gasket, and then tightenthe bolt to the specified torque.9. Refill with the specified amount ofthe recommended engine oil, andthen install and tighten the oil fillercap.TIPBe sure to wipe off spilled oil on anyparts after the engine and exhaust sys-tem have cooled down.NOTICEECA11621 In order to prevent clutch slip-page (since the engine oil alsolubricates the clutch), do notmix any chemical additives. Donot use oils with a diesel speci-fication of “CD” or oils of a high-er quality than specified. Inaddition, do not use oils labeled“ENERGY CONSERVING II” orhigher. Make sure that no foreign mate-rial enters the crankcase.1. O-ring 1. Torque wrenchTightening torque:Oil filter cartridge:17 Nm (1.7 m·kgf, 12 ft·lbf)Tightening torque:Engine oil drain bolt:43 Nm (4.3 m·kgf, 31 ft·lbf)1Recommended engine oil:See page 8-1.Oil quantity:Without oil filter cartridge replace-ment:3.73 L (3.94 US qt, 3.28 Imp.qt)With oil filter cartridge replacement:3.93 L (4.15 US qt, 3.46 Imp.qt)