Yamaha YZF-R7 Owner's Service Manual

Also see for YZF-R7: Owner's manual Owner's manual Owner's manual Owner's manual Owner's service manual

Contents

1 - 9INSTRUMENT AND CONTROL FUNCTIONS11224455331. Pass switch “PASS”2. Lights switch3. Dimmer switch4. Turn signal switch5. Horn switch “ ” EAU00118Handlebar switchesEAU00120Pass switch “PASS”Press the switch to operate the passinglight.EAU00134Lights switchTurning the lights switch to “ ”,turns on the auxiliary light, meter lightsand taillight. Turning the lights switch to“ ”, turns the headlight on also.EAU00121Dimmer switchTurn the switch to “ ” for the highbeam and to “ ” for the low beam.EAU00127Turn signal switchTo signal a right-hand turn, push theswitch to “ ”. To signal a left-handturn, push the switch to “ ”. Oncethe switch is released it will return to thecenter position. To cancel the signal,push the switch in after it has returnedto the center position.EAU00129Horn switch “ ”Press the switch to sound the horn.11221. Engine stop switch2. Start switch “ ” EAU00138Engine stop switchThe engine stop switch is a safety de-vice for use in an emergency such aswhen the motorcycle overturns or iftrouble occurs in the throttle system.Turn the switch to “ ” to start the en-gine. In case of emergency, turn theswitch to “ ” to stop the engine.EAU00143Start switch “ ”The starter motor cranks the enginewhen pushing the start switch.EC000005CAUTION:See starting instructions prior tostarting the engine.aa11221. Lever position adjusting dial2. Arrow marka. Lever distance EAU00153Clutch leverThe clutch lever is located on the lefthandlebar. It is equipped with a clutchlever adjusting dial and a clutch switch,which is integrated into the ignition cir-cuit cut-off system. (Refer to the enginestarting procedures for a description ofthis system.) To disengage the clutch,pull the clutch lever toward the handle-bar. To engage the clutch, release thelever. The lever should be pulled rapid-ly and released slowly for smoothclutch operation.To adjust the distance between theclutch lever and the handlebar grip,turn the clutch adjusting dial whilepushing the lever forward. Make surethe setting on the clutch lever adjustingdial is aligned with the arrow mark.