1 - 10INSTRUMENT AND CONTROL FUNCTIONS111. Shift pedalEAU00157Shift pedalThis motorcycle is equipped with a con-stant-mesh 6-speed transmission.The shift pedal is located on the leftside of the engine and is used in com-bination with the clutch when shifting.1. Lever position adjusting dial2. Arrow marka. Lever distance EAU00161Front brake leverThe front brake lever is located on theright handlebar and is equipped with abrake lever adjusting dial.To activate the front brake, pull the le-ver toward the handlebar.To adjust the front brake lever position,turn the brake lever adjusting dial whilepulling the lever forward. Make sure thesetting on the brake lever adjusting dialis aligned with the arrow mark.111. Rear brake pedalEAU00162Rear brake pedalThe rear brake pedal is on the rightside of the motorcycle. Press down onthe brake pedal to apply the rear brake.1. OpenEAU00172Fuel tank capTo openInsert the key and turn it 1/4 turn clock-wise. The lock will be released and thecap can be opened.To closePush the tank cap into position with thekey inserted. To remove the key, turn itcounterclockwise to the original posi-tion.11 NOTE:This tank cap cannot be closed unlessthe key is in the lock. The key cannotbe removed if the cap is not lockedproperly.EW000023WARNINGBe sure the cap is properly installedand locked in place before riding themotorcycle.1. Filler tube2. Fuel levelEAU01183FuelMake sure there is sufficient fuel in thetank. Fill the fuel tank to the bottom ofthe filler tube as shown in the illustra-tion.EW000130WARNINGDo not overfill the fuel tank. Avoidspilling fuel on the hot engine. Donot fill the fuel tank above the bot-tom of the filler tube or it may over-flow when the fuel heats up later andexpands.
