Yanmar 4JH3-TE Series Operation Manual

Also see for 4JH3-DTE: Service manual Service manual Operation manual

31GB3. Operation3.3.6 ProcedureThe following diagram shows the procedures for operation explained up to this point.Parts of the operation may differ depending on the remote control system being used.Accompanying operation manuals should be read carefully and understood.Inspection BeforeStartingStarting the EngineDriving Device ClutchClutch Remote ControlLeverStarter Switch OFF ON ON STARTONAlarm LampsInstrument PanelWarming-up OperationSpeed LeverGovenor Remote ControlHandleStopping the Boat/Preparing to Stop theEngineSpeed LeverGovenor RemoteControl HandleDriving Device ClutchClutch Remote ControlLeverSpeed LeverGovenor RemoteControl HandleStarting OperationDriving Device ClutchClutch Remote ControlLeverSpeed LeverGovenor RemoteControl HandleSpeed leverGovernor RemoteControl HandelDriving Device ClutchClutch Remote ControlLeverSpeed LeverGovenor RemoteControl HandleSpeed leverGovernor RemoteControl HandleCooling-down OperationEngine Stop ButtonEngine StopsEngage ClutchForward or ReverseAdjust SpeedLow Speed Position1000rpm or lowerForward orReverseAdjust speedLow SpeedPosition1000rpm or lowerFor 5 mins. or longerLow SpeedHigh SpeedTrawlingTrawling HandleTrawling LeverReturn to NormalOperationTrawling HandleTrawling LeverPut in NEUTRAL• Checking the AlarmDevices• Turn the key for no longerthan 15 secs. Removehand from key afterstarting.Checking for ProblemsFor 5 mins. or longerLow Speed Position1000rpm or lower for5 mins. or longerChecking the EngineDuring OperationLow Speed Position1000rpm or lowerPut in NeutralLow Speed High SpeedRacing the EngineRepeat Several TimesKMH4A ClutchJH-Turbo-Engels1b 28-06-2002 19:55 Pagina 31