User Guide for CP960 IP Phone172The system establishes the call between phone C and B.NoteCall PickupYou can use call pickup to answer someone else’s incoming call on your phone. The CP960 IPphone supports directed call pickup and group call pickup. Directed call pickup is used forpicking up a call that is ringing at a target phone number. Group call pickup is used for pickingup a call that is ringing at any phone number in a certain group. The pickup group should bepredefined, contact your system administrator for more information.You can pick up an incoming call by tapping DPickup/GPickup on the dialing screen. To usecall pickup, you need to configure the call pickup code beforehand on a global or per-line basisvia web user interface. The call pickup code configured on a per-line basis takes precedenceover that configured on a global basis.NoteDirected Call PickupTo enable directed call pickup and configure the directed call pickup code on a globalbasis via web user interface:1. Click on Features->Call Pickup.2. Select Enabled from the pull-down list of Directed Call Pickup.3. Enter the directed call pickup code in the Directed Call Pickup Code field.4. Click Confirm to accept the change.The call park code and call park retrieve code are predefined on the system server. Contact yoursystem administrator for more information.If the parked call is not retrieved within a period of time assigned by the system, the phoneperforming call park will receive a call back.If there are many incoming calls at the same time, tapping GPickup on the phone will pick up thecall that rings first.
