Configuring the phonePick up the handset and dial “**90#” to get the IP address of by voice prompt. Then enter it (forexample http://192.168.3.35) into the address bar of web browser.The default login name and password are admin/admin.Note: Please locate your PC in the same network segment of the IP phone(192.168.3.X) to access the webconfiguration page. Please consult your network administrator or service provider for help.Note: Using the wrong network parameters may result in inaccessibility of your phone and may also have animpact on your network performance! Please contact your network administrator!Configuring via Web PageDHCP: Pick up the handset and dial “**88#”, follow the prompt to enter the “0#” todisable the DHCP, or “1#” to enable it.Choose Network->Internet Port (WAN)Choose AccountPlease contact your service provider for more account details.Network Settings:DHCP: By default the phone attempts to contact to a DHCP Server in your network in order to obtainits valid network settings, e.g. IP address, sub mask, gateway, DNS server, etc.Static IP Address: If your phone cannot contact a DHCP Server for any reason, you need to enterthe network settings manually via Static IP Address. Please contact your internet administrator formore details.Account Setting:Account Active:Display Name:Register Name:User Name:Password:SIP Server:You can Enable/Disable this account by the right/ left navigation key respectively.It is showed as Caller ID when making a phone call.It is provided by ISP for registration.User account information, provided by VoIP service provider.It is provided by ISP for registration.Server for registration, provided by ISP.Parameter:You can refer to the above "Configuring via Web Page" for the parameter details.V0.1Static IP:1) IP Address: Pick up the handset and dial “**80#”, then follow the prompt to enter the IP addressand press the # key to confirm (for example:192.168.1.56#).2) Subnet Mask: Pick up the handset and dial “**81#”, then follow the prompt to enter the SubnetMask and press the # key to confirm (for example:255.255.255.0#).3) Gateway: Pick up the handset and dial “**82#”, then follow the prompt to enter the gatewayand press the # key to confirm (for example:192.168.1.0#).4) DNS1: Pick up the handset and dial “**83#”, then follow the prompt to enter the DNS1 and pressthe # key to confirm (for example:202.101.103.55#).5) DNS2: Pick up the handset and dial “**84#”, then follow the prompt to enter the DNS2 and pressthe # key to confirm (for example:202.101.103.55#).Simply IP PhoneSIP-T18PConfiguring via WebNetwork Configuring via Keypad