Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones166To register a SIP account via phone user interface:1. Press Menu->Settings->Advanced Settings (default password: admin) ->Accounts.2. Select the desired account and then press the Enter soft key.3. Select Enabled from the Active Line field.4. Enter the desired value in the Label, Display Name, Register Name, User Name,Password and SIP Server1/2 field respectively. Contact your system administrator formore information.5. If you use outbound proxy servers, do the following:1) Select Enabled from the Outbound Status field.2) Enter the desired IP address or domain name in the Outbound Proxy1/2 field.3) Enter the desired interval in the Proxy Fallback Interval field.6. Press the Save soft key to accept the change or the Back soft key to cancel.Call DisplayDisplay contact photo allows the IP phone to present the contact avatar when it receives anincoming call, dials an outgoing call or engages in a call. Display contact photo feature is onlyapplicable to SIP-T48G/T46G/T29G IP phones.Display called party information allows the IP phone to present the callee identity in addition tothe presentation of caller identity when it receives an incoming call.The following figure shows an example of screen display when Display Called Party Informationfeature is enabled on the phone (a call from Tom (phone number: 1008) to Marry (phonenumber: 1009)).For SIP-T42G/T41P/T40P/T27P/T23P/T23G/T21(P) E2/T19(P) E2 and CP860 IP phones:For SIP-T48G/T46G/T29G IP phones:
