Yealink SIP-T20 User Manual

Also see for SIP-T20: Owner's manual Quick installation guide User guide Quick start guide Quick start guide

Yealink SIP-T20 User Manual Manual pdf 17 page image

Overview5Two ways to customize configurations of your SIP-T20P/SIP-T20 IP phone: The user Interface on the IP phone. The user Interface in a web browser on your PC.The hardware components keypad and LCD screen constitute the phone user interface,which allows the user to execute all call operation tasks and basic configurationchanges directly on the phone. In addition, each phone has a web user interface toaccess all configuration settings. In many cases, either the phone user interface and/orthe web user interface interchangeably. However, in some cases, it is only possible touse one or the other interface to operate the phone and change settings.You can customize your phone by pressing the MENU key to access the phone userinterface. The Advanced option is only accessible to the administrator, and the defaultadministrator password is “admin” (case-sensitive). For more information oncustomizing your phone with the available options from the phone user interface, referto Customizing Your Phone on page 17.In addition to the phone user interface, you can also customize your phone via web userinterface. In order to access the web user interface, you need to know the IP address ofyour new phone. To obtain the IP address, press the OK key on the phone. Enter the IPaddress (e.g., http://192.168.0.10 or 192.168.0.10) in the address bar of web browser onyour PC. The default administrator user name and password are both “admin”(case-sensitive).The options you can use to customize the IP phone via phone user interface and/or viaweb user interface are listed in the following table:Options Phone User Interface Web User InterfaceStatus√ √--IP Address--MAC--Firmware--Network--Phone--AccountsBasic Phone Settings√--Language √