Yealink SIP-T21P User Manual
Also see for SIP-T21: User guideQuick start guideQuick reference guide
                                                                                                                                                | |
Contents
| 
User Guide for the SIP-T21P IP Phone16To configure PPPoE via phone user interface:1. Press Menu->Settings->Advanced Settings (password: admin) ->Network->WANPort->IPv4->PPPoE IP Client.2. Enter the user name and password in the corresponding fields.3. Press the Save soft key to accept the change or the Back soft key to cancel.NoteGenerally, your phone will be deployed with multiple other phones. In this case, yoursystem administrator will configure the phone parameters beforehand, so that after youstart up your phone, the phone will be registered and ready for use. If your phone is notregistered, you may have to register it. For more information on how to register yourphone, refer to Account Management on page 54.If the phone has successfully started up, the idle screen will be shown as below:The idle screen shows the label of current account, time and date, and four soft keys.Using the wrong network parameters may result in inaccessibility of your phone and mayalso have an impact on your network performance. For more information on theseparameters, contact your system administrator. |
Related manuals for Yealink SIP-T21
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine