Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Contents

Yealink SIP-T22P User Manual Manual pdf 111 page image

Advanced Phone Features99In the following figure, the LCD screen shows an incoming call from 1002 on themonitored line.NoteWhen there is an active call on the IP phone, you can transfer the active call to themonitored phone number directly by pressing the BLF key. The phone transfers theactive call differently depending on the transfer mode on DSS key. For more informationon the transfer mode on DSS key, refer to transfer in the DSS Keys section on page 48.You can record calls by pressing a record key on the phone. The SIP-T22P IP phonesupports record and URL record.Two ways of call recording: Record: The phone sends SIP INFO message containing a specific header “Record:on/off” to trigger a recording. URL Record: The phone sends HTTP URL request to trigger a recording. Contactyour system administrator for the predefined URL.NoteTo configure a record key via phone user interface:1. Press Menu->Features->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.Call record is not available on all servers. Contact your system administrator for moreinformation.If your phone is locked and the type of the keypad lock is configured as Function Keys orAll Keys, you cannot use the Pickup, Send, NewCall and Cancel soft keys until unlocked.