Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Contents

Yealink SIP-T22P User Manual Manual pdf 97 page image

Basic Call Features85configured in advance. Refer to Directory on page 28 and Remote Phone Bookon page 41 for more information.).3. Press the Send soft key, or to dial out.4. Press or the Tran soft key to complete the transfer when receiving theringback.To perform an attended transfer:1. Press or the Tran soft key during a call.2. Do one of the following:- Enter the number you want to transfer the call to.- Press the Dir soft key, and then select Local Directory. Select the desired group,and search for the contact (Directory should be configured in advance. Refer toDirectory on page 28 for more information.).- Press the Dir soft key, and then select History. Select the desired list and useor to select the entry (Directory should be configured in advance.Refer toDirectory on page 28 for more information.).- Press the Dir soft key, and then select Remote Phone Book. Select the desiredgroup and search for the contact (Directory and remote phone book should beconfigured in advance. Refer to Directory on page 28 and Remote Phone Bookon page 41 for more information.).3. Press the Send soft key, or to dial out.4. After the party answers the call, press or the Tran soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.You can enable or disable call waiting on the phone. If call waiting is enabled, you canreceive another call when there is an active call on the phone. Otherwise, anotherincoming call is automatically rejected by the phone with a busy message when there isan active call on the phone. You can also enable or disable the phone to play a warningtone when receiving another call.