Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 39 page image

Enterprise IP Phone Using the Advanced Phone FunctionsTo change the administrator password via Phone interface:1) Press the softkeys Menu, scroll to Settings, press Enter softkey, use the navigationkeys to highlight Advanced Settings.2) You are prompted to enter the required password, the default one is admin.3) Scroll to Set Admin Password, press Enter softkey.4) You are prompted to enter the old and new password, Press Ab3 softkey to changethe input method.5) Press OK softkey to confirm the change, press Cancel softkey to return to previousmenu.To change the administrator password via Web interface:Choose Security, enter the old, new password and Confirm Password, choose Confirmbutton to save the changes, or Cancel button to cancel the changes.RebootYou should reboot the phone when you are challenged, e.g. after applying changes tothe phone configuration.To reboot via Web interface:1) Choose Upgrade->Basic.2) Click Reboot button.Note:You can only reboot from Web interface. Please do not power off during reboot, or it willcase the flash memory error.Reset to FactoryYou should reset the phone only in this case: the phone configuration was changed andthe phone is not functioning anymore. To maintain the configuration of the phone, youneed your system administrator or service provider’s advice.To reset to factory via phone interface:1) Press the softkeys Menu, scroll to Settings, press Enter softkey, use the navigationkeys to highlight Advanced Settings.2) You are prompted to enter the required password, the default one is admin.3) Scroll to Reset to Factory, press Enter softkey.4) You are prompted to confirm the change, press OK softkey to reset to factorysettings, press Cancel softkey to return to previous menu.- 34 -