Yealink SIP-T22P User Manual

Also see for Yealink SIP-T22P: Auto provisioning guide User guide User guide User guide User guide

Yealink SIP-T22P User Manual Manual pdf 9 page image

Enterprise IP Phone Getting StartedNote:1. If inline power is provided, do not install AC adapter. Make sure the Ethernet cableand switch/hub are PoE compliant.2. The Internet Port can be also connected to Hub/Switch/IP PBX or other internetdevices.The phone can also share the network connection with other network devices such asPC. Connect the phone’s PC port and computer’s Network Port together using anEthernet cable, shown as below:Configuration and RegistrationIf you are administrator, you need to do some simple configuration to make the phonework. If not, please contact your internet administrator or service provider for moredetails.Configuring via Web PagePress OK button on the keypad of the phone to enter the status page and find out theIP address of IP phone. Enter it (for example http://192.168.3.35) into the address barof web browser. The default login name and password are both “admin”.Note:Please locate your PC in the same network segment of IP phone (192.168.3.X) toaccess the web configuration page. Please consult your system administrator for help.Network SettingsChoose Network->Internet Port.DHCP: By default the phone attempts to contact a DHCP Server in your network inorder to obtain its valid network settings, e.g. IP address, sub mask, gateway, DNSserver, etc.Static IP Address: If your phone cannot contact a DHCP Server for any reason, youneed to enter the network settings manually via Static IP Address. Please contact yourinternet administrator for more details.- 4 -