Yealink SIP-T29G User Manual
Also see for Yealink SIP-T46G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                                                                                                                                              | |
Contents
| 
User Guide for the SIP-T29G IP Phone140To place an intercom call when the target phone is idle:1. Press the intercom key when the phone is idle.The called destination plays a warning tone and automatically answers the call inthe speakerphone mode by default.2. To end the intercom call, press the intercom key again or the EndCall soft key.You can use multicast paging to quickly and easily broadcast time sensitiveannouncements to people who are listening to a specific multicast group. You canconfigure a multicast paging key or paging list key on the phone, which allows you tosend a Real Time Transport Protocol (RTP) stream to the pre-configured multicastaddress(es) without involving SIP signaling. You can configure the phone to receive anRTP stream from pre-configured multicast listening address(es) without involving SIPsignaling. You can specify up to 10 multicast listening addresses.To configure a multicast paging key via phone user interface:1. Press Menu->Features->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Key Event from the Type field.4. Press or , or the Switch soft key to select Multicast Paging from the KeyType field.5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.6. Enter the multicast IP address and port number (e.g., 224.5.6.20:10008) in the Valuefield.The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255. |
Related manuals for Yealink Yealink SIP-T46G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine