Yealink SIP-T2xP Auto Provisioning Manual

Also see for Yealink SIP-T28P: User guide User guide User guide User guide User guide

Contents

Yealink SIP-T2xP Auto Provisioning Manual Manual pdf 31 page image

Obtaining the Address of Provisioning Server25Yealink IP phones support to obtain the provisioning server address in the followingways: Zero Touch Plug and Play (PnP) Server DHCP Options Phone FlashThe priority of obtaining the provisioning server address is as follows: Zero Touch-->PnPServer-->DHCP Options (Custom option-->option 66-->option 43) -->Phone Flash.The following sections detail the process of each way.Zero Touch allows you to configure the network parameters and provisioning serveraddress via phone user interface during startup. This feature is helpful when there is asystem failure on the phone. To use Zero Touch, make sure this feature is enabled.To configure the Zero Touch via web user interface:1. Click on Settings->Auto Provision.2. Select Enabled from the pull-down list of Zero Active.