Yealink SIP-T32G User Manual

Also see for SIP-T32G: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T32G User Manual Manual pdf 39 page image

Customizing Your Phone292. Press or to select the desired ring tone.3. Press the Save soft key to accept the change or the Back soft key to cancel.To s elect a ring tone for the phone via web user interface:1. Click on P hone->Preference.2. Select the desired ring tone from the pull-down list of Ring Tones.3. Click Conf irm to accept the change.To s elect a ring tone for the account via web user interface:1. Click on A ccount.2. Select the desired account from the pull-down list of A ccount.3. Select the desired ring tone from the pull-down list of Ring Tones.If common is selected, this account will use the ring tone selected for the phone atthe path P hone->Preference. Refer to the above instruction.4. Click Conf irm to accept the change.You can also upload custom ring tones for your phone, contact your systemadministrator for more information.NoteThis section provides the operating instructions for managing contacts. The topicsinclude: Local Directory Blacklist Remote PhonebookThe ring tone for an incoming call on the phone may be different. For example, when thephone receives an incoming call from a contact stored in the local directory, it will playthe ring tone assi gned to the con tact in the contact directory (refer to Addin g Contacts inthe Contact Management section). Otherwise, the phone will play the ring tone assignedto the account. If both the contact ring tone and the account ring tone are not assigned,then the phone will play the ring tone assigned for the phone.