Yealink SIP-T32G User Manual

Also see for SIP-T32G: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T32G User Manual Manual pdf 81 page image

Basic Call Features714. Press or the Transfer soft key to complete the transfer when receivingringback.To perform an attended transfer:1. Press or the Transfer soft key during a call.2. Enter the number you want to transfer the call to.3. Press or to dial out.4. After the party answers the call, press or the Transfer soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.You can enable or disable the call waiting feature on the phone. If the call waitingfeature is enabled, you can receive another call when there is an active call on thephone. If the call waiting feature is disabled, another incoming call is automaticallyrejected by the phone with a busy message when there is an active call on the phone.You can also enable the play tone feature to hear a warning tone when receivinganother call.To configure call waiting via phone user interface:1. Press Me nu->Features->Call Waiting.2. Press or , or the Switch soft key to select Enable from the Call Waitingfield.3. Press or , or the Switch soft key to select Enable from the Call Waiting Tonefield.4. Press the Save soft key to accept the change or the Back soft key to cancel.You can also configure the call waiting feature via web user interface at the pathP hone->Features->General Information.