Configuring Basic Features952) Enter the destination number you want to forward all unanswered incomingcalls to in the Forward to field.3) Press or , or the Switch soft key to select the ring time to wait beforeforwarding from the After Ring Times field.The default ring time is 60 seconds.4) (Optional.) Enter the no answer forward on code or off code respectively inthe On Code or Off Code field.3. Press the Save soft key to accept the change.Call transfer enables the IP phone to transfer an existing call to another party. The IPphones support call transfer using the REFER method specified in RFC 3515. The IPphones offer three types of transfer: Blind Transfer -- Transfer a call directly to another party without consulting. Blindtransfer is implemented by a simple REFER method without Replaces in the Refer-Toheader. Semi-attended Transfer -- Transfer a call after hearing the ringback tone.Semi-attended transfer is implemented by a REFER method with Replaces in theRefer-To header. Attended Transfer -- Transfer a call with prior consulting. Attended transfer isimplemented by a REFER method with Replaces in the Refer-To header.Normally, call transfer is completed by pressing the transfer key. The blind transfer onhook and attended transfer on hook features allow the IP phone to complete thetransfer through on-hook.When a user performs the semi-attended transfer, the semi-attended transfer featuredetermines whether to display the prompt ―1 New Missed Call(s)‖ on the destinationparty’s phone LCD screen.ProcedureCall transfer can be configured using the configuration files or locally.Configuration File .cfgSpecify whether to complete thetransfer through on-hook.Configure the semi-attendedtransfer feature.For more information, refer to CallTransfer on page 262.Local Web User Interface Specify whether to complete thetransfer through on-hook.