Yealink SIP-T38G Administrator's Manual

Also see for SIP-T32G: User guide Auto provisioning guide User guide User guide User guide

Contents

Yealink SIP-T38G Administrator's Manual Manual pdf 216 page image

Resource Files203You can add contact one by one on the IP phone directly. In some cases, you may wantto add multiple contacts to the IP phone at the same time or share the contacts on manyIP phones. You can create a local contact file, and then place the local contact file to theroot directory of the provisioning server, specify the access URL of the contact file in theconfiguration files.When editing a local contact file, remember the following: indicates the start of a contact file and indicatesthe end of a contact file. indicates the start of a contact list and indicates the end of acontact list. indicates the start of a group list and indicates the endof a group list. When specifying a ring tone for the contact or the group, the format of the valuemust be Auto, Resource:RingN.wav (for the default system ring tone) orCustom:Name.wav (for the customized ring tone). When specifying the desired line for the contact, the valid values are 0 and line ID,0 stands for all lines, multiple line IDs are separated by comma.ProcedureUse the following procedures to customize a local contact file.Customizing a local contact file:1. Open the template file using an ASCII editor.2. For each contact that you want to add, add the following string to the file, eachstarting on a separate line:sLine="" sRing="" group=""/>Where:contact sDisplayName=‖‖ specifies the name of the contact (This value cannot beblank or duplicated).OfficeNumber=‖‖ specifies the office number of the contact.sMobilNumber=‖‖ specifies the mobile number of the contact.sOtherNumber=‖‖ specifies the other number of the contact.sLine=‖‖ specifies the line you want to add this contact to.sRing=‖‖ specifies the ring tone for this contact.group=‖‖ specifies the existing group you want to add the contact to.3. For each group that you want to add, add the following string to the file, each