Yealink SIP-T40P User Manual

Also see for SIP-T40P: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T40P User Manual Manual pdf 107 page image

Basic Call Features97The procedures to set up a network conference call on specific servers may be differentfrom introduced above. Contact your system administrator for more information.You can use call park feature to place a call on hold, and then retrieve the call fromanother phone in the system (for example, a phone in another office or conferenceroom). You can park an active call by pressing the call park key on the phone. If the callis parked successfully, the response is either a voice prompt confirming that the call wasparked, or a visible prompt on the LCD screen.NoteTo configure a call park key v ia phone user interface:1. Press Me nu->Features->DSS Keys.2. Select the desired DSS key.3. Press or , or the Switch soft key to select Ke y Event from the Ty pe field.4. Press or , or the Switch soft key to select Call Park from the Ke y Type field.5. Press or , or the Switch soft key to select the desired line from the A ccountID field.6. (Optional.) Enter a string that will appear on the LCD screen in the Label field.7. Enter the call park code in the Value field.8. Press the Save soft key to accept the change or the Back soft key to cancel.Call park key is configurable via web user interface at the path DSSKey->Line Key.To use call park:1. User on phone A places a call to phone B.2. User on phone A wants to take the call in a conference room for privacy, and sopresses the call park key on phone A.3. User on phone A walks to an available conference room where the phone isdesignated as phone C. The user dials the call park retrieve code to retrieve theparked call.Call park is not available on all servers. Contact your system administrator for moreinformation.