Yealink SIP-T41P User Manual

Also see for Yealink SIP-T41P: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T41P User Manual Manual pdf 105 page image

Advanced Phone Features95In the following figure, the LCD screen shows an incoming call from 1001 on themonitored line.NoteWhen there is an active call on the IP phone, you can transfer the active call to themonitored phone number directly by pressing the BLF key. The phone transfers theactive call differently depending on the transfer mode via DSS key. For moreinformation on performing call transfer, refer to Call Transfer on page 82.To configure the transfer mode via DSS key via web user interface:1. Click on Features->Transfer.2. Select the desired transfer mode from the pull-down list of Transfer Mode ViaDsskey. Depending on your selection:- If you select Blind Transfer, press the BLF key to blind transfer the call to themonitored phone number.- If you select Attended Transfer, press the BLF key to dial out the monitoredphone number and then you can perform the attended or semi-attendedtransfer.- If you select New Call, press the BLF key to place a new call to the monitoreduser.3. Click Confirm to accept the change.NoteIf your phone is locked and the type of the keypad lock is configured as Function Keys orAll keys, you cannot use the Dpickup, Dial, New Call and Cancel soft keys until unlocked.Transfer mode via DSS key is configurable via web user interface only.