Administrator’s Guide for SIP-T46G IP Phone210ProcedureUse the following procedures to customize a replace rule template.Customizing a replace rule template:1. Open the template file using an ASCII editor.2. Add the following string to the template, each starting on a separate line:‖‖ LineID=""/>Where:Prefix="" specifies the numbers to be replaced.Replace="" specifies the alternate string instead of what the user enters.LineID="" specifies the desired line(s) for this rule. When leaving it blank, thisreplace rule will apply to all lines.3. Specify the values within double quotes.4. Place this file to the root directory of the provisioning server.The following is an example of a replace rule template: Prefix="1" Replace="05928665234" LineID=""/> Prefix="2(xx)" Replace="002$1" LineID="0"/> Prefix="5([6-9])(.)" Replace="3$2" LineID="1,2,3"/> Prefix="0(.)" Replace="9$1" LineID="2"/> Prefix="1009" Replace="05921009" LineID="1"/>You can create multiple dial-now rules using the dial-now template. After preparing thedial-now template, you need to place the dial-now template to the root directory of theprovisioning server and specify the access URL in the configuration files.When editing a dial-now template, remember the following: indicates the start of a template and indicates the end ofa template. Create dial-now rules between and . When specifying the desired line(s) for the dial-now rule, the valid values are 0 andline ID. 0 stands for all lines, multiple line IDs are separated by comma. At most 20 rules can be added to the IP phone. The expression syntax in the dial-now rule template is the same as introduced inthe section Creating Dial Plan on page 23.
