Yealink SIP-T46G User Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 160 page image

User Guide for the SIP-T46G IP Phone144To perform an attended transfer:1. Press or the Transfer soft key during a call.2. Do one of the following:- Enter the number you want to transfer the call to.Press or to dial out.- Press the Directory soft key, and then select Local Directory. Select the desiredgroup and search for the contact (Directory should be configured in advance. Refer toDirectory on page 61 for more information).Press , or the Send soft key to dial out.- Press the Directory soft key, and then select History. Select the desired list and thenpress or to select the entry (Directory should be configured in advance.Refer to Directory on page 61 for more information).Press , or the Send soft key to dial out.- Press the Directory soft key, and then select Remote Phone Book. Select the desiredgroup and search for the contact (Directory should be configured in advance. Refer toDirectory on page 61 and Remote Phone Book on page 76 for more information).Press , or the Send soft key to dial out.3. After the party answers the call, press or the Transfer soft key to complete thetransfer.If you are using a handset, the transfer can be completed by hanging up the handset.You can cancel the transfer before the call is connected by pressing the Cancel soft key.Call WaitingYou can enable or disable call waiting on the phone. If call waiting is enabled, you can receiveanother call while there is already an active call on the phone. Otherwise, another incoming callis automatically rejected by the phone with a busy message when there is an active call on thephone. You can also enable or disable the phone to play a warning tone when receiving anothercall.To configure call waiting via phone user interface:1. Press Menu->Features->Call Waiting.2. Press or , or the Switch soft key to select Enabled from the Call Waiting field.3. Press or , or the Switch soft key to select Enabled from the Play Tone field.4. (Optional.) Enter the call waiting on code or off code respectively in the On Code or OffCode field.