Yealink SIP-T46G User Manual

Also see for Yealink SIP-T42G: Developer's guide Administrator's guide Manual Auto provisioning guide Getting started

Contents

Yealink SIP-T46G User Manual Manual pdf 183 page image

Advanced Phone Features167To perform an attended transfer:1. Press the BLF key of the monitored user which you want to transfer this call to. The phonewill dial the number of the monitored user.2. Press the BLF key of the monitored user again or the Transfer soft key to complete thetransfer after the monitored user answers the call.When the transfer mode on DSS key is set to New Call and there is already an active call on theIP phone, you can do the following:To perform a new call:1. Press the BLF key of the monitored user you want to call.The phone will dial the number of the monitored user.Picking up an Incoming Call of the Monitored UserWhen the monitored user receives an incoming call, the BLF key indicator of the monitored userwill flash red. If you enable visual and audio alert features on the phone, the phone will play aspecific ring tone (refer to BLF Ring Type) and display the incoming call information on thescreen. You can use the BLF key to pick up an incoming call of the monitored user. Beforepicking up an incoming call, ensure that the directed call pickup code has been configured inadvance.To pick up an incoming call when the IP phone is idle:1. Press the BLF key.The incoming call of the monitored user is answered on the IP phone.NoteBLF ListYou can use the BLF List feature to monitor a list of users defined by your system administrator.For example, your system administrator enables BLF List, and creates a BLF List URI (e.g.,BLFList@example.com) including a list of user1, user2 on the server. The BLF List keys on the IPphone can present the status of user1 and user2. The key LEDs illuminate either flashing or soliddepending on the status of those users. For more BLF List key LED indicators, refer to LEDInstructions on page 9.You can use the BLF List keys in the following ways: When the monitored user is idle, press the BLF list key to dial out the phone number. When there is already an active call on the IP phone, you can transfer the active call to themonitored user by pressing the BLF List key. The phone handles the active call differentlydepending on the transfer mode on DSS key. For more information on the transfer modeIf the call pickup code is not configured, the phone will place a call to the monitored userinstead of picking up an incoming call of the monitored user when you press the BLF key.