Yealink SIP-T48G User Manual
Also see for Yealink SIP-T48G: Developer's guideAdministrator's guideManualAuto provisioning guideGetting started
                                                                                    | |
Contents
| 
User Guide for the SIP-T48G IP Phone70During the conference call, you can do the following actions:• Press or tap the Hold soft key to place the conference call on hold.• Tap the Split soft key to split the conference call into two individual calls on hold.• Tap to remove the desired party.• Press to mute the conference call, all other participants can hear each other, but they cannothear you.• Tap to mute the party. The muted party can hear everyone, but no one can hear the muted party.• Tap the EndCall soft key to drop the conference call.Call ParkYou can use call park feature to place a call on hold, and then retrieve the call from another phone in the system(for example, a phone in another office or conference room). You can park an active call by tapping the Parksoft key or call park key (if configured) on the phone. If the call is parked successfully, there is a voice promptconfirming that the call was parked. You can retrieve the parked call by tapping Retrieve on dialing screen orretrieve park key (if configured). If the parked call is not retrieved within a period of time defined by the system,the phone performing call park will receive a call back.Call PickupYou can use call pickup to answer someone else’s incoming call on your phone. The SIP-T48G IP phone supportsdirected call pickup and group call pickup. Directed call pickup is used for picking up a call that is ringing at atarget phone number. Group call pickup is used for picking up a call that is ringing at any phone number in acertain group. The pickup group should be predefined, contact your system administrator for more information. |
Related manuals for Yealink Yealink SIP-T48G
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine