Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Using the VC110 Video Conferencing Endpoint105To control local camera via the remote control during a video call:1. Press (More soft key) during an active call.2. Press or to scroll to Camera Preset, and then press .3. Press the navigation key to adjust the angle of the camera or press or to adjust thefocus of the camera.4. Long press any numeric key (0-9) to save the current preset position of the camera.The original preset will be overwritten if you configure a preset for the numeric key that isalready associated with a preset.5. Press (Exit soft key) to return to the idle screen.To control the local camera during a video call via web user interface, go to the path Home(Hover your cursor over the registered account, click , and then control the camera in thepop-up window).To adjust the camera to the preset via the remote control during a video call:1. Press (More soft key) during an active call.2. Press or to scroll to Camera Preset, and then press .3. Short press the saved key to change camera position and focus to the preset.4. Press (Exit soft key) to return to the idle screen.If the remote camera enables the far-end camera control feature (For more information, refer toFar-end Camera Control on page 82) and corresponding camera control protocol is enabled (Formore information, refer to your system administrator), you can control the remote cameraduring the video call via the remote control.To adjust the remote camera to the preset via the remote control during a video call:1. Press (More soft key) during an active call.2. Press or to scroll to Near/Far Camera, and then press .3. Select the remote video, and then press .4. Press (More soft key).5. Press or to scroll to Camera Preset, and then press .6. Short press the saved key to change remote camera position and focus to the preset (Thepreset is set by the remote endpoint in advance).7. Press (Exit soft key) to return to the idle screen.To clear preset via the remote control:1. Press (Menu soft key) to enter main menu.2. Press or to select the Video & Audio menu.3. Press or to scroll to Camera General Settings, and then press .4. Press or to scroll to Clear Preset Position, and then press .