Yealink VC110 User Manual

Also see for VC110: Getting started Recovery guide Quick start guide Administrator's guide User guide

Using the VC110 Video Conferencing Endpoint1112. Select the desired value from the pull-down list of Auto Recording.3. Click Confirm to accept the change.ScreenshotYou can capture the screenshot from the camera via the remote control or web user interface.You need to insert a USB flash drive to the USB port on the VC110 all-in-one unit to storescreenshots when you are using remote control and make sure the USB feature is enabled. Formore information, please refer to USB Configuration on page 60.You can view, delete or scale the screenshots via the remote control.When you capture a screenshot via the web user interface, you can save the screenshots to thecomputer. The stored screenshot will be saved in .jpg format and named as the captured timeand date. You can view the screenshot using an application capable of viewing .jpg pictures.Note The endpoint only supports USB flash drive in FAT32 format.After the USB flash drive is inserted to the USB port on the VC110 all-in-one unit and the USBfeature is enabled, the display device will prompt "USB device available, press * to record or press# to screenshot". The icon and used storage will appear on the status bar of the displaydevice. The icon will appear on the LCD screen of the video conferencing phone.The endpoint supports capturing one screenshot per second.