Yealink VC400 User Manual

Also see for VC400: Getting started Recovery guide Administrator's guide Administrator's guide Administrator's guide

Contents

User Guide for the VC400 Video Conferencing System26Indicator LED on the camera:LED Status DescriptionSolid green The camera is properly connected to the codec, andthe VC400 codec is powered on.Solid red The VC400 codec is in sleep mode.Flashing green Press the key on the remote control.Off The camera is not properly connected to the VC400codec, or the VC400 codec is powered off.Indicator LED on the VCP40:LED Status DescriptionSolid red The phone is initializing.The call is muted.Flashing red The phone is ringing.Solid green The phone places a call.There is an active call on the phone.Off The phone is idle.User InterfacesTwo ways to customize configurations of your VC400 video conferencing system: Remote control The user interface in a web browser on your PC.NoteRemote ControlYou can use the remote control and display device to configure and use the VC400video conferencing system.For more information about the function of each key on the remote control, refer toVCR10 Remote Control on page 21.The Advanced option is only accessible to the administrator. The default administratorpassword is “0000”. For more information on how to view, enter and edit the value ofthe menu on the display device, refer to Navigating Menus on the Display Device onpage 39 and Entering Data and Editing Fields on page 40.The display device and remote control constitute the system user interface, which allowsthe user to execute all call operation tasks and basic configuration changes directly.Detailed operation steps will be introduced in the feature section.