User Guide for the VC400 Video Conferencing System30Installing the VC400 Video Conferencing SystemDo the following:1. Connect the supplied 2m Ethernet cable to the Internet port on the VC400 codecand the switch/hub device port.2. Connect the DVI cable to the Camera port on the VC400 codec and the camera.3. Connect the supplied Ethernet cable with Audio In label to the Audio In port on theVC400 codec and Audio Out port on the VC400 phone.4. Connect the HDMI cable to the Display1 port on the VC400 codec and the HDMIport on the display device.5. Connect the power line of the display device.6. (Optional.) Connect the VGA cable to the PC port on the VC400 codec and a PC.7. Connect power adapter to the DC19V port on the VC400 codec and power outlet.You can fasten all cables with cable ties after all devices are connected.
